Harvest Field intelligence
01
Sign in

Open Account and sign in with your operator account before using protected production data.

02
Choose a scenario

Use Dry zone, Nutrients, or Offline in the Alerts panel to create a field situation.

03
Run analysis

Select Run field analysis to generate recommendations, risk, ROI, and a drone mission.

04
Prepare the drone handoff

In Drone mission payload, choose DJI Agras T50, choose Spray, enter the operator-approved rate, and export the task spec. It contains ordered WGS84 waypoints, AGL altitude, spray actions, and preflight guidance.

05
Review and fly through DJI

Use the exported package to prepare the matching DJI SmartFarm or Agras App route. The operator must set speed, return-to-home, payload, buffers, weather limits, and takeoff/landing points before starting the T50.

06
Reset before the next demo

Select Reset demo to return the dashboard to the normal field state.

If the dashboard asks for a demo control token, enter the private value provided by your Harvest administrator. Never share it publicly.

DJI Agras T50 example

From dry-zone alert to flight-ready handoff

Harvest createsField boundary, ordered WGS84 waypoints, AGL altitude, spray action, application rate, and a preflight checklist.
Operator completesDJI format conversion or import, speed, RTH altitude, payload, obstacle and no-spray checks, weather review, and legal approval.

T50 supports up to 40 kg spraying and 50 kg spreading according to DJI. Confirm the current aircraft, firmware, controller, and local operating limits before every mission.

Farm setup

New farm onboarding status

Use Farms to locate, define, save, and switch between authenticated farm workspaces.

Available nowAWS Hybrid map, address search, device location, boundary drawing, GeoJSON/KML import, and multi-farm switching.
After setupChoose the active farm from the Farms workspace. Add sensor nodes separately when field hardware is ready.

Open Farms to begin, or read the Farm onboarding guide.